Operating Instructions

 PLEASE WATCH OPERATING INSTRUCTIONS VIDEO BEFORE USE

1. CLEAN OUT THE GAP WITH A SMALL BRUSH OR VACUUM
2. CLEAN THE FLOORING PLANK WITH A DAMP CLOTH
3. DRY THE FLOORING PLANK WITH A CLOTH  NOTE: THE ADHESIVE WILL NOT ADHERE PROPERLY IF THE SURFACE IS WET OR DAMP
4. REMOVE THE PROTECTIVE PLASTIC SHEET FROM BLACK ADHESIVE
5. CENTER THE FLOOR GAP FIXER ON THE FLOORING PLANK, APPROXIMATELY 1” FROM THE GAP AND PRESS DOWN FIRMLY TO ADHERE
6. HOLD THE FLOOR GAP FIXER WITH ONE HAND AND APPLY SLIGHT DOWNWARD PRESSURE
7. STRIKE THE END, OPPOSITE THE GAP, WITH A RUBBER MALLET UNTIL THE GAP CLOSES  NOTE: USE OF EXCESSIVE FORCE MAY CAUSE DAMAGE TO THE JOINT
8. REMOVE AND REPEAT ON THE REST OF THE GAPS IN THE ROW